Activity-Based Costing (ABC) arose in the 1980s from the increasing lack of relevance of traditional cost accounting methods. The traditional cost accounting methods were designed around 1870 - 1920 and in those days industry was labor intensive, there was no automation, the product variety was small and the overhead costs in companies were generally very low compared to today. However, from the 1960s - particularly 1980s - this changed rapidly. For these reasons, and more, traditional cost accounting has been called everything from 'number 1 enemy of production' and questions whether it is 'an asset or a liability' have been raised.
The question of course is whether ABC has overcome these deficiencies or not? It has. In fact, ABC has been called one of the most important management innovations the last hundred years.
So what is really the difference between ABC and traditional cost accounting methods? Despite the enormous difference in performance, there is three major differences:
This is discussed in more detail in the subsequent sections and illustrated below.
But first, the direction of the arrows are different because ABC brings detailed information from the processes up to assess costs and manage capacity on many levels whereas traditional cost accounting methods simply allocate costs, or capacity to be correct, down onto the cost objects without considering any 'cause and effect' relations.
Consumption of resources versus consumption of activities
ABC acknowledges that you cannot manage costs, you can only managed what is being done and then costs will change as a consequence. In traditional cost accounting, however, the underlying assumption is that costs can be managed, but as most managers have found out the hard way - managing costs is almost impossible.
The benefit of the ABC mindset is that it opens up for a much wider array of measures when it comes to improving productivity. By investigating systematically what is being done, i.e. the activities, one will not only be able to identify surplus capacity if it occurs, but also lack of capacity and misallocation of capacity. A result of this might be that costs are cut the traditional way, but it might as well lead to a reallocation of capacity to where it is most needed which will yield high productivity more effectively than the traditional way.
Volume related allocation bases versus drivers at many levels
Due to the historic background of traditional cost accounting methods, they tend to use direct labor - or other volume related allocation bases - for cost assignment purposes. But as overhead has grown and new technologies have come, it goes without saying that assigning costs based on only 5 - 15% (in most companies) of total costs is highly risky. In fact, the incurred errors are up to several hundred percent!
In ABC, however, costs are assigned according to the 'cause and effect' relationship between activities (the actual process) and cost objects, which is captured using drivers. The drivers are therefore not allocation bases in the traditional sense, although they work the same way mathematically - drivers are estimates of actual cost behavior and can therefore also be used to identify, or they are themselves, the critical cost factors. Because the drivers are related to the actual processes, they occur on several levels. The four most common levels are;
Hence, we see that the traditional usage of fixed and variable costs is totally meaningless. In ABC, all costs are included. However, ABC employs a different usage and definition of fixed and variable costs. A fixed activity cost is a cost that exists due to the very existence of the activity whereas a variable activity cost changes as the output of the activity changes. This distinction is very helpful in various improvement efforts.
While we discuss drivers it is important to mention that in ABC there are two types of drivers w.r.t. cost assignment;
Before we continue it is important to mention that in early terminology activity drivers were referred to as 'second stage cost drivers' whereas resource drivers were denoted 'first stage cost drivers'. But it is evident that the word 'cost driver' is misleading in this context because activity- and resource drivers do not tell what drives costs in the general case.
Therefore, in Activity-Based Management (ABM) a third type of drivers is employed in addition to the two aforementioned drivers. This type of drivers is called cost drivers and they are the underlying causes of costs of activities and measured by non-financial performance measures. Today, the most important of these measures can be presented in a Balanced Scorecard and they represent the process view in ABM. These are possibly the most difficult drivers to identify.
Structure-orientation versus process-orientation
Traditional costing systems are more concerned about the organizational charts than the actual process. Traditional cost accounting systems are therefore structurally oriented and the process view is completely missing. The result is that one cannot ask 'what needs to be done?', because the process is unknown. The only questions such costing systems can give answers to, although often off the mark, is 'what do we have at our disposal to do the job?'.
The latter question is a question of capacity, that is, how capacity is managed. Capacity is measured as an expense and found easily in the accounting system. The first question is a question of resource management, because resources is what you need in order to do a job and measured as a cost, but the resource measures can only be found by investigating the processes.
Thus, because ABC is process-oriented and gathers information from the processes it can be used to identify both 'what needs to be done?' and how to allocate resources most productively. ABC can therefore give managers the ability to match the resource needs with the available capacity as closely as possible, and hence improving productivity. From this we understand that the structure oriented approach of traditional costing systems gives no decision support in allocating capacity to match resource needs. Over time this leads to cost inefficient organizations and poor profitability.
There is also another aspect to process-orientation; how ABC is used and implemented. Because ABC can direct attention towards the causes of costs (critical success factors) related to both cost objects and processes and not to mention the cost of quality, ABC is viewed as more than a method for cost accounting - it invites to a whole new way of management, such as;
From the above discussion it should be evident that not only is ABC useful and powerful to any organization, but a need for companies that want to excel, and efficiently and effectively increase their Sustainable Competitive Advantage (SCA). As one marketing executive said: "This is revolutionary!".
To read more about ABC simply buy this book where ABC, and much more, is discussed extensively both theoretically and with simple examples and thorough case studies. There you can also learn about how ABC can be used to look forward in time and create simulation models for a variety of purposes.
Send mail to firstname.lastname@example.org with questions or comments about this web site.